Lubricating Oil System 75Kg Engine Flushing Machine ASE-008E With 2 .5m Pipe

Air Drive Engine Lubricating Oil System Cleaning Machine ASE-008E

Briefly introduction of the machine :

According to auto engine maintenance regulations, after the car driving 5~10 thousand kilometers,the engine needs oil replacement and internal cleaning. Under high speed and temperature working, the auto engine easily generates oil mud, carbon, colloid etc, which will cause engine abnormal work and fault even result in accident if it can't be cleaned and waste oil can't be changed on time. Manually changing & cleaning oil is difficult to handle ,time wasting and in low efficiency. The newest generation oil changing& cleaning equipment ASE-008 is easy to handle, convenient and practicable. It can clean & change oil thoroughly and quickly, compatible with a wide range of
vehicles.ASE-008E is your right choice.
Features:
Cabinet type, easy to move and operate.
Dynamic recycle cleaning engine lubrication system.
Pressurized flush the remaining waste oil to make sure thoroughly cleaning.

Power source is compressed air, economic and stable.
Transparent measuring cup can display the volume and the color and the volume of waste oil .
Function:
It can clean the engine lubrication system dynamically
It can pressurized flush the inside of engine second time to make sure waste oil is extracted
thoroughly.
It has pre lubrication function for interior of engine.
Parameter:

Environment temperature:-10~+40°C
Relative Humidity:<85%
Pressure Gauge:0~10kg
Inlet pipe:2 .5m
Outlet pipe:2.5m
Filter accuracy:5μm
Noise:<60db
NW:60 Kg
GW:75 Kg
Equipment Appearance:

ASE-008E ATF machine is cabinet type. It has handle on the top and wheels on the bottom. Easy to move. The oil pipes use quick joints, easy to install and dismantle. Operation panel is simple and easy to understand.

Attention: In the process of dynamic cleaning and changing oil deeply, the equipment needs to be monitored by people.

Preparation before operating
1. Stop the car in the workplace and switch off the engine, lift the car to suitable position to make driving wheel hanging in the air,
2. Use tools to dismantle oil filter, install suited adapter kit on the base of oil filter according to the adapter table.
3. Place the cleaning filter core in the transparent filter cup of the equipment.
Check and confirm below points
1.Whether the oil adapter kit is tightly installed on the oil filter base;
2.Whether the inlet/outlet hose of oil adapter connect correctly with the outlet/return hose of equipment
3.Adjust the pressurized flush valve (see pic of working panel, part no 7) to OFF.
4.Adjust anticlockwise the regulator valve Of Pressurized Flushing to the minimum port (see pic of working panel, part no 8)
5. Connect adapter kits and pipeline of equipment to vehicle.